Blue Lake Construction

November 18, 2026

8 min.

Share: 

Tub-to-Shower Conversion Cost in Seattle: 2026 Walk-In Shower Guide

Converting an unused bathtub into a walk-in shower is the single most requested bathroom upgrade in the Seattle area — and one where online price estimates mislead the most, because national averages describe prefab kits while most Puget Sound homeowners want custom tile. This guide breaks down what a tub-to-shower conversion really costs in Seattle, Bellevue and the Eastside in 2026, what drives the price, when you need a permit, and how long the work takes.

The short answer

Nationally, This Old House's 2026 guide puts a basic tub-to-shower conversion at $2,000–$12,000, with most homeowners spending $5,000–$10,000 — but those figures describe prefab kits and simple swaps. In the Seattle and Eastside market, a full custom conversion — tub out, custom tile walk-in shower in, new glass, updated plumbing, permits handled — typically runs $15,000–$35,000 as a standalone design-build project, the same range we quote in our 2026 bathroom remodel cost guide. Local labor rates, tile work, and permit requirements put most Seattle-area projects in the upper half of any national range.

2026 cost ranges by shower type

Here is how the national 2026 numbers break down by what you're installing (This Old House, from Homewyse and Home Depot pricing):

  • Prefabricated shower stall: $2,000–$6,000. A one-piece or multi-panel acrylic unit set into the old tub footprint. Fastest and cheapest, but limited sizes and a plastic look.
  • Walk-in shower: $5,000–$12,000. A doored or open shower with a low curb, standard valve work, and stock glass.
  • Custom tile shower: $6,000–$12,000+. A mortar or foam pan, waterproofing, and tiled walls — the finish most Seattle-area homeowners actually want.
  • Curbless (zero-entry) shower: $8,000–$15,000+. The floor itself is recessed and sloped to the drain, which usually means opening the subfloor — more labor, more waterproofing, and the best long-term accessibility.

Add Seattle-area labor, tile prices, and glass, and a finished custom tile or curbless conversion lands in that $15,000–$35,000 design-build range. If you're comparing bids that differ wildly, our guide on how to read a remodeling bid explains what the low number is usually leaving out.

What drives the price up or down

  • Plumbing changes. Keeping the drain and valve where the tub's were is the single biggest money-saver. Moving a drain line runs about $900–$1,100, a new pressure-balanced shower valve $700–$1,200, and relocating supply lines adds $700 or more — several plumbing changes together can exceed $2,000 before tile. Older Seattle homes often need code-compliant valves once the wall is open; see our plumbing & electrical services.
  • Tub removal and what's under it. Pulling and disposing of the old tub runs $300–$1,200. Decades of hidden moisture can mean subfloor repairs — a few hundred dollars for patches, $1,000+ if framing needs reinforcement. Plan a 10–20% contingency.
  • Glass. A framed door runs $400–$1,200 installed; frameless tempered-glass panels run $1,200–$3,000, and a full custom frameless enclosure can double the cost of the door package.
  • Tile and finish level. Ceramic subway tile and large-format porcelain sit at the affordable end; marble, zellige, and stone slab climb quickly. Niches, benches, and linear drains each add labor.
  • Size. A standard tub footprint is roughly 60" × 30–32". Expanding the new shower to 36" deep or wider means moving walls or absorbing floor space — more framing, waterproofing, and tile.

Do you need a permit in Seattle or on the Eastside?

Yes, in most cases. A like-for-like fixture swap can be exempt, but the moment you move a drain, replace the valve, open walls, or alter venting, Washington requires plumbing (and sometimes electrical) permits — in Seattle through SDCI and the Seattle Services Portal, and on the Eastside through the Bellevue, Kirkland, Redmond, Sammamish, and Issaquah permit centers. Our guides to remodeling permits in Washington and Seattle vs. Eastside permit timelines cover what to expect; as your general contractor we pull the permits and schedule inspections for you.

How long does a tub-to-shower conversion take?

Nationally, most professional conversions take three to seven days. For a custom tile or curbless shower in the Seattle area, plan on one to three weeks of construction once materials are on site: demolition and tub-out, rough plumbing and inspection, waterproofing, tile, glass measurement (custom glass is templated after tile and takes 1–2 weeks to fabricate), and finish plumbing. If it's your only bathroom, read our tips on living at home during a remodel — and winter is one of the easiest times to book interior work like this, as we cover in the best time to remodel in Seattle.

Walk-in showers and aging in place

Tub-to-shower conversions are the most requested aging-in-place upgrade we build. A curbless entry, a built-in bench, blocking in the walls for future grab bars, a handheld sprayer, and non-slip tile turn a daily hazard into the safest room in the house — without looking clinical. Our aging-in-place remodeling guide goes deeper on costs and design choices.

Should you keep one tub in the house?

If you have two or more bathrooms, converting the primary or hall bath to a walk-in shower while keeping a tub elsewhere is the resale sweet spot — families with young children still look for at least one tub. In a one-bathroom home, a well-designed walk-in shower still appraises well in the Seattle market, where buyers increasingly prefer them, but it's worth a conversation about your timeline in the home. For the full-room version of this math, see the bathroom remodel cost guide.

What a Blue Lake conversion includes

Blue Lake Construction builds tub-to-shower conversions across Seattle, Bellevue, and the Eastside on a fixed-price, fixed-schedule contract: demolition, plumbing by licensed plumbers, Schluter-class waterproofing, custom tile, glass, and all permits and inspections handled in-house. One project manager runs the job from tub-out to final walkthrough.

Thinking about trading the tub you never use for a shower you'll love? Request a free estimate or call (206) 786-5988 — we'll measure your bathroom, talk through curbless vs. curbed options, and give you a fixed price.

Subscribe to our Newsletter!

Modern kitchen with white marble countertop, wooden stools, and hexagonal tile backsplash.

Subscribe to our Newsletter!

Modern kitchen with white marble countertop, wooden stools, and hexagonal tile backsplash.

Latest Blog posts

View All

Formwork and supports for a new home addition foundation pour on a Blue Lake Construction jobsite in the Seattle area

Blue Lake Construction

18.11.2026

9 min.

How Much Does a Primary Suite or Second-Story Addition Cost in Seattle & Bellevue? 2026 Guide

2026 cost of a primary suite addition and a second-story addition in Seattle, Bellevue and the Eastside: price per square foot, worked totals, what the bathroom adds, foundation and engineering costs, permits, timelines, resale value and how to budget.

Wood framing of a new custom home under construction in the Seattle area with workers on the upper floor

Blue Lake Construction

16.11.2026

9 min.

How Much Does It Cost to Build a House in Seattle & the Eastside? 2026 Guide

What it costs to build a new custom home in Seattle, Bellevue and the Eastside in 2026 — cost per square foot, worked totals by home size, lot and site costs, permit fees and timelines, and how a teardown-rebuild compares to remodeling.

Modern kitchen with wooden cabinets, black accents, glassware display, green bar stool, and countertop with vase and bowl.

Not sure how to start? Get a free consultation.

One of our experts will get back to you as soon as possible.