Blue Lake Construction
November 16, 2026
9 min.
How Much Does It Cost to Build a House in Seattle & the Eastside? 2026 Guide
Building a new home in the Seattle area is a very different financial exercise from buying one, and the numbers online swing wildly because they mix national averages with local reality. This guide lays out the 2026 figures that actually apply in Seattle, Bellevue, Kirkland, Redmond and the rest of the Eastside: construction cost per square foot, worked totals for typical home sizes, what the lot and site work really add, permit fees and timelines, and when a teardown-rebuild beats remodeling the house you already own.
The short answer
In 2026, building a custom home in Seattle or on the Eastside costs roughly $300–$500 per square foot for construction, per published Seattle-market guides from Block Renovation and others — well above national averages, which still hover near $150 per square foot in lower-cost markets. Luxury builds in Medina, Madison Park, Clyde Hill or on waterfront lots regularly exceed $800 per square foot. That is construction only: the lot, design, permits and site development come on top.
Worked totals by home size
- 2,000 sq ft home: roughly $600,000–$1,000,000 in construction cost at Seattle-market rates.
- 2,500 sq ft home: roughly $750,000–$1,250,000.
- 3,000 sq ft home: roughly $900,000–$1,500,000.
National cost surveys (Angi's 2025 Seattle data, for example) put the average Seattle house build near $408,000 with most projects between about $209,000 and $632,000 — but those averages include production-style builds on easy lots. Custom design-build work on in-city and Eastside lots almost always lands in the ranges above.
What the lot adds
Land is the biggest wildcard in the Seattle market. In-city buildable lots — often teardown opportunities — run from roughly $800,000 into the millions, and waterfront parcels go far beyond that. The site itself then drives construction cost: site preparation and foundations typically take 18–28% of the budget, a hillside lot can add $100,000–$300,000 in site development (pier or caisson foundations run $3,000–$8,000 per pier), retaining walls cost $200–$400 per linear foot, and a geotechnical study runs $5,000–$15,000 on steep or critical-area sites. If the lot has an old house on it, demolition and utility disconnects are their own line items. Our foundation page covers the structural side of difficult sites.
Design, permits and fees
Architecture, engineering and design typically take a meaningful share of a custom-home budget — published Seattle guides put architecture plus premium finishes at 20–30% of project cost. On the permit side, a straightforward single-family build carries roughly $3,000–$6,000 in plan review and permit charges, plus separate electrical, plumbing and mechanical permits; steep-slope, waterfront and environmentally critical sites cost more. In Seattle, permits run through SDCI and the Seattle Services Portal; Eastside cities use their own permit centers and are usually faster — our Seattle vs. Eastside permit timeline guide compares them, and our Washington permit guide explains the process end to end. Sales tax on materials (about 10.25% in Seattle) is built into every bid.
How long a new build takes
Plan on 18–24 months from first design meeting to move-in: 3–6 months of design and engineering, 2–6 months of permit review depending on the city and the site, and 10–14 months of construction for a typical single-family home. Hillside access can add 15–25% to both schedule and budget. A fixed-duration contract with one project manager — how Blue Lake builds new homes — is the best protection against an open-ended timeline.
Teardown-rebuild vs. whole-home remodel
On an expensive in-city or Eastside lot, the real question is often rebuild versus remodel. If the foundation, framing and layout are sound, a whole-home remodel at roughly $150–$450 per square foot is usually the better value. A teardown-rebuild wins when the structure has failed, the layout cannot be fixed, or the lot value justifies maximizing the house — see our whole-home remodel and flip page for how we scope the remodel side. Smaller ways to add space — a home addition at $350–$550 per square foot or a backyard ADU or DADU — are often the smarter first comparison, and our home additions and ADU construction pages cover both.
Ways to control the number
- Pick the lot with the build in mind. A flat, dry lot with utilities at the street can be hundreds of thousands cheaper to build on than a steep one.
- Two stories beat one. Single-story homes cost 10–15% more per square foot because roof and foundation are the expensive parts.
- Lock scope before finishes. Cabinetry, stone and glazing choices can swing a build by 20–30%; big upgrades like panoramic glazing ($80,000–$200,000) or geothermal HVAC ($50,000–$90,000) deserve their own decision.
- Compare complete bids. Make every builder price the same plans and specs — our guide to comparing contractor bids shows what to look for.
- Insist on a fixed, itemized price. Cost-plus contracts move every risk onto you.
Build with Blue Lake
Blue Lake Construction is a licensed Washington general contractor (#BLUELLC760C3) based in Bellevue, building new custom homes in Seattle, Bellevue and across the Eastside on fixed-price, fixed-duration contracts with permits handled in-house. See our new construction page or request a free consultation to walk your lot and get a real number.
Subscribe to our Newsletter!

Subscribe to our Newsletter!

Latest Blog posts
View All

Blue Lake Construction
16.11.2026
9 min.
How Much Does a Whole-Home Remodel Cost in Seattle & the Eastside? 2026 Price Guide
What a whole-home remodel costs in Seattle, Bellevue and the Eastside in 2026 — cost per square foot by scope tier, worked totals for typical homes, what drives the price, permits, timelines and how investor flips are scoped differently.

Blue Lake Construction
13.11.2026
6 min.
How Much Does an Outdoor Kitchen Cost in Seattle? 2026 Price Guide
What outdoor kitchens and outdoor living spaces cost in Seattle and the Eastside in 2026 — installed prices for prefab and custom builds, counters and appliances, gas and electrical permits, covered patios, and how to plan the build season.

Not sure how to start? Get a free consultation.
One of our experts will get back to you as soon as possible.
